Gigabyte GA-8I945PLGE-RH Manual de usuario descargar pdf (Pagina 13)

Hardware Installation- 13 -

English

1-3-2 Installation of the Heatsink

The heatsink may adhere to the CPU as a result of hardening of the heatsink paste.To prevent

such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used for

heat dissipation or using extreme care when removing the heatsink.

Fig. 6

Finally, please attach the power connector of the

heatsink to the CPU fan header located on the

motherboard.

Fig. 3

Place the heatsink atop the CPU and make sure

the push pins aim to the pin hole on the

motherboard.Pressing down the push pins

diagonally.

Fig. 4

Please make sure the Male and Female push pin are

joined closely. (for detailed installation instructions,

please refer to the heatsink installation section of the

user manual)

Fig. 5

Please check the back of motherboard after

installing. If the push pin is inserted as the picture,

the installation is complete.

Fig.1

Please apply an even layer of heatsink paste on

the surface of the installed CPU.

Fig. 2

(Turning the push pin along the direction of arrow is

to remove the heatsink, on the contrary, is to install.)

Please note the direction of arrow sign on the male

push pin doesn't face inwards before installation. (This

instruction is only for Intel boxed fan)

Male Push Pin

Female Push Pin

The top of Female Push Pin

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Sin comentarios

Gigabyte GA-8I945PLGE-RH Manual de usuario Pagina 13