Gigabyte GS-R12T4H2-RH Manual de usuario Pagina 1

Service GuideGIGABYTEGS-R12T4H2-RH 1U Rack Mount ServerDual Intel® Xeon LGA1366 Processor ServerboardRev. 1.0

10GS-R12T4H2-RH Rack Mount Server (Support RAID 0, 1, 1E) (Option)Super I/OController  ITE IT8720F Super I/OFront I/O  2 X USB 2.0 connectorRea

11GS-R12T4H2-RH Rack Mount ServerPre-installation InstructionsPerform the steps below before you open the server or before you remove or replaceany co

12GS-R12T4H2-RH Rack Mount ServerRemove the chassis cover.Step 1 Loosen the screw on the front chassis cover.Step 2 Push down the indentation located

13Hardware Installation ProcessInstalling the ProcessorPlease make sure the CPU type and speed that are supported by the motherboard.Step 1 Raise the

14GS-R12T4H2-RH Rack Mount ServerInstalling the Heat SinkStep 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please wellre

15GS-R12T4H2-RH Rack Mount ServerInstalling the Memeory ModuleStep 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.S

16Hardware Installation ProcessCPU1CPU2123456789101213141617181115No. Code No. Code 1 DDR_P1C2D0 10 DDR_P0C0D2 2 DDR_P1C2D1 11 DDR_P0C0D1 3 DDR_P1C2D2

17Hardware Installation ProcessU-DIMM Population TableP0C0D0P1C0D0P0C0D1P1C0D1P0C0D2P1C0D2P0C1D0P1C1D0P0C1D1P1C1D1P0C1D2P1C1D2P0C2D0P1C2D0P0C2D1P1C2D1

18GS-R12T4H2-RH Rack Mount ServerR-DIMM Population TableP0C0D0P1C0D0P0C0D1P1C0D1P0C0D2P1C0D2P0C1D0P1C1D0P0C1D1P1C1D1P0C1D2P1C1D2P0C2D0P1C2D0P0C2D1P1C2

19Hardware Installation ProcessInstalling the PCI Expansion CardStep 1 Lift the riser bracket slightly, then pull it out from the server chassis.Step

PrefaceBefore using this information and the product it supports, please read the following general information.1. This Service Guide provides you wit

20GS-R12T4H2-RH Rack Mount Server345656

21GS-R12T4H2-RH Rack Mount ServerInstalling the Hard Disk DriveStep 1 Press the release button.Step 2 Pull the locking lever to remove the HDD tray.St

22Hardware Installation ProcessHDD Security LockThe HDD bays incorporate a security screw to prevent accidental HDD release.To engage the lock, turn t

23GS-R12T4H2-RH Rack Mount ServerInstalling and Replacing the FAN DuctStep 1 Remove the airducts from the chassis by pulling the rear edge in the dire

24Hardware Installation ProcessReplacing the FAN AssembllyStep 1 Remove thefan assemble pulling the rear edge in the direction of the arrowStep 2 Lift

25GS-R12T4H2-RH Rack Mount ServerReplacing the MotherboardStep 1 Remove the chassis cover. See Removing the Chassis Cover on page 12.Step 2 Remove the

26Hardware Installation ProcessReplacing the Power SupplyStep 1 Remove the fanduct from the chassis by pulling the rear edge.Step 2 Disconnect the t

27GS-R12T4H2-RH Rack Mount Server

28GS-R12T4H2-RH Rack Mount ServerReplacing the Chassis CoverStep 1 Replace the cover, and slide the chassis in the direction of the arrow  until the

29GS-R12T4H2-RH Rack Mount ServerFront View of GS-R12T4H2-RHAppearance of GS-R12T4H2-RHNOTE! For Front LED description, please go to Front Panel LED I

3GS-R12T4H2-RH Rack Mount ServerTable of ContentsPreface...

System Appearance30Rear View of GS-R12T4H2-RH31 2 3 456 789 1. Power Module Connect the power cable to the socket. 2. PS/2 port Connect the keyboard a

31LED DescriptionFront Panel LED Indicator234156No Indicator 1 Powerstatus 2 System ID 3 Systemstatus 4 HDDactivityColor State DescriptionGreen On Sys

32GS-R12T4H2-RH Rack Mount ServerColor State DescriptionGreen On Link between system andnetwork or no accessGreen Blink Network accessGreen On Link be

33GS-R12T4H2-RH Rack Mount ServerLAN port LED IndicatorNo Name 1 Speedindicator2 Link/activityindicatorColor State DescriptionN/A Off 10Mbps con

34LED DescriptionHard Disk Drive LED Description Description HDD Prsent HDD access HDD failure HDD removed HDD connected and rebuilding data

35GS-R12T4H2-RH Rack Mount ServerGC-BS14U-RH Back plane board Components2143107511136891214151817161920 21 22 2324 25 26 27No Code Description 1 P2 Po

36GS-R12T4H2-RH Rack Mount ServerSystem Block DiagramVRD 11.1VRD 11.1CPU2Nehalem-EPProcessorLGA1366Port 1CPU1Nehalem-EPProcessorLGA1366Port 1QPIQPIINT

37GS-R12T4H2-RH Rack Mount ServerConnector Icon DescriptionSuggest IconDescriptionKeyboardVGAMouseLANCOMUSB

38Motherboard ComponontsGA-7TTSE-RH Motherboard ComponentMotherboard Placement and Jumper Setting234156910711121315142181618192022172324

39GS-R12T4H2-RH Rack Mount ServerItem Component1. Processor 1 socket2. Processor 2 socket3. SATA data cable cable connectors4. USB connector for inter

4Table of ContentAdvanced ... 47Processor Configuratio

40Jumper SettingJumper Setting2134567 1 ) BIOS_RVCR1 (BIOS Revocery jumper)1-2 close: Normal operation. (Default setting)2-3 close: Enable BIOS Recov

41GS-R12T4H2-RH Rack Mount Server 5 ) PASS_DIS1 (Skip Supervisor password jumper)111-2 Close: Normal operation. (Default setting)2-3 Close: Clear Su

42Jumper SettingExpansion Card Components DescriptionThe two riser cards installed in the PCI riser card bracket assembly povides support for both ful

43GS-R12T4H2-RH Rack Mount Server<> Move to previous item<> Move to next item<> Move to the item in the left hand<> Move t

44BIOS SetupGETTING HELPMain MenuThe on-line description of the highlighted setup function is displayed at the bottom of the screen.Status Page Setup

45GS-R12T4H2-RH Rack Mount ServerSystem Date Set the System Date. Note that the “Day” automatically changed after you set the date.System Time The tim

46BIOS SetupTotal MemoryThe BIOS determines how much total memory is present during the POST.

47BIOS SetupFigure 2: AdvancedAdvancedAbout This Section: AdvancedWith this section, allowing user to configure your system for advanced operation. Us

48GS-R12T4H2-RH Rack Mount ServerProcessor Configuration

49BIOS SetupProcessor ConfigurationThis category includes the Processor information of CPU Speed, Processor ID ,ProcessorL2 / L3 Cache, and QPI Freque

5GS-R12T4H2-RH Rack Mount ServerSafety, Care and Regulatory Information Important safety informationRead and follow all instructions marked on the pr

50GS-R12T4H2-RH Rack Mount ServerMachine CheckingEnabled Enable Machine Checking. (Default setting)Disabled Disable Machine Checking.Fast String Opera

51GS-R12T4H2-RH Rack Mount ServerProcessor Power ManagementFigure 2-1-1: Processor Power ManagementEIST (GV3) & C StateEnabled Enable EIST (GV3) a

52BIOS SetupSW_ALL In SW_ALL mode, the OS Power Manager is responsible for coordinatingthe P-state among loical processors with dependencies and must

53GS-R12T4H2-RH Rack Mount Serverstate. (Default setting)Disabled Disable CPU C6 Report.CPU C7 ReportEnabled Desire state for the Nehalem core C7 stat

54BIOS SetupMemory Configuration

55GS-R12T4H2-RH Rack Mount Server Memory InformationThese following items display all information of current Base Memory, Extended Memory,, and instal

56BIOS SetupAdvanced Chipset Configuration

57GS-R12T4H2-RH Rack Mount ServerFigure 2-3-1: Intel VT for Directed I/O (VT-d)

58BIOS SetupIntel VT for Directed I/O (VT-d)Enabled Intel VT for Directed I/O (VT-d). (Default setting)Disabled Disable Intel VT for Directed I/O (VT-

59GS-R12T4H2-RH Rack Mount Server2GB Select 2GB as granularity of PCI hole.QPI Control SettingsEnabled Enable QPI Control settings. (Default setting)D

6Safety Information* To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.* Do not plug a modem or telephone cable i

60BIOS SetupPCI ConfigurationFigure 2-4: PCI ConfigurationOnboard LAN iSCSI Boot ROMEnabled Enable Onboard LAN iSCSI Boot ROM.Disabled Disable this f

61GS-R12T4H2-RH Rack Mount ServerLAN2Option ROMEnabled Enable onboard LAN2 device and initialize device expansionROM. (Default setting)Disabled Disab

62GS-R12T4H2-RH Rack Mount ServerSATA ConfigurationFigure 2-5: SATA Configuration

63BIOS SetupSerial ATAEnabled Enables on-board serial ATA function. (Default setting)Disabled Disables on-board serial ATA function. Native Mode Ope

64BIOS SetupAuto: Set parameters automatically. (Default setting)CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parametersa

65BIOS SetupI/O DeviceConfigurationSerial Port A This allows users to configure serial prot A by using this option.Enabled Enable the configuration.

66GS-R12T4H2-RH Rack Mount ServerBase I/O Address/IRQ3F8/IRQ4 Set IO address to 3F8/IRQ4.2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting)3E8/IRQ

67BIOS SetupBoot DeviceConfigurationBoot -time Diagnostic ScreenWhen this item is enabled, system will shows Diagnostic status when system boot.Enable

68GS-R12T4H2-RH Rack Mount ServerNumLockThis option allows user to select power-on state for NumLock.On Enable NumLock. (Default setting)Off Disable t

69BIOS SetupThermal and Acoustic ConfigurationFigure 2-8: Thermal and Acoustic ConfigurationOpen loop Thermal ThrottleEnabled Open loop Thermal Thrott

7GS-R12T4H2-RH Rack Mount Serverthe FCC.Your telephone company may make changes in its facilities, equipment, operations, or procedures thatcould affe

70GS-R12T4H2-RH Rack Mount ServerClose loop Thermal ThrottleEnabled Close loop Thermal Throttle. (Default setting)Disabled Disable Close loop Thermal

71GS-R12T4H2-RH Rack Mount ServerPowerFigure 3: PowerAfter Power FailureThis option provides user to set the mode of operation if an AC / power loss o

72BIOS SetupSecurityFigure 4: SecuritySet Supervisor PasswordYou can install and change this options for the setup menus. Type the password up to 6cha

73GS-R12T4H2-RH Rack Mount ServerSet User PasswordYou can only enter but do not have the right to change the options of the setup menus. Whenyou selec

74BIOS SetupServerFigure 5: Server

75GS-R12T4H2-RH Rack Mount ServerSystem Management

76BIOS SetupSystem ManagementThis category allows user to view the system management features. Including information ofMotherboard Hardware informatio

77GS-R12T4H2-RH Rack Mount ServerFigure 5-2: Console RedirectionConsole RedirectionConsole RedirectionIf this option is set to enabled, it will use a

78BIOS SetupThis option allows user to set the specified baud rate.Options 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.Terminal TypeThis option

79GS-R12T4H2-RH Rack Mount ServerBootFigure 6: BootBoot Priority OrderThis field determines which type of device the system attempt to boot from afte

8Safety InformationNOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the totalload to be connected to a telephon

80BIOS SetupExitFigure 7: ExitAbout This Section: ExitOnce you have changed all of the set values in the BIOS setup, you should save yourchanges and e

81GS-R12T4H2-RH Rack Mount ServerLoad Settup Defaultif you highlight this item and press Enter, a dialog box asks if you want to install optimals

9Feature SummaryMotherboard  GA-7TTSE-RHProcessor Supported  Supports dual Intel® Xeon® processors Intel Xeon® Dual-Core/Quad-Core processor in L