Gigabyte Processor Motherboard GA-7N400S-L Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
BIOS Setup- 35 -
English
2-4 Integrated Peripherals
IDE Function Setup
* Only for GA-7N400S-L.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
` IDE Function Setup [Press Enter]
` RAID Config [Press Enter]
OnChip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Onboard H/W LAN* [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [Normal]
x UR2 Duplex Mode Half
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP]
ECP Mode Use DMA [3]
Game Port Address [201]
Midi Port Address [Disabled]
x Midi Port IRQ 10
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
IDE Function Setup
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
Serial ATA [Enabled]
SATA DMA Transfer [Enabled]
SATA Spread Spectrum [Disabled]
On-Chip Primary PCI IDE
When set at "Enabled", it allows you to use the onboard primary IDE. If a hard disk controller card is
used, please set at "Disabled".
Enabled Enable onboard first channel IDE port. (Default value)
Disabled Disable onboard first channel IDE port.
On-Chip Secondary PCI IDE
When set at "Enabled", it allows you to use the onboard secondary IDE. If a hard disk controller card is
used, please set at "Disabled".
Enabled Enable onboard secondary channel IDE port. (Default value)
Disabled Disable onboard secondary channel IDE port.
Serial ATA
Enabled Enable Serial ATA controller function. (Default value)
Disabled Disable this function.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Comentarios a estos manuales

Sin comentarios